Reza Tagiabadi (Faculty Member)

Journal Paper

1. "Effect of solidification cooling rate on corrosion behavior of Al-15Mg2Si composites"
   Elahe Safari, Reza Tagiabadi, Mohammad Hossein Ghoncheh, Mohammad Emami, Morteza Saghafiyazdi
   Materials Today Communications, Vol. 38, pp.1-10, 2024
2. "Multi-pass friction hardening treatment of Ti6Al4V alloy toward improved tribological properties"
   Atiie Shafaghatiyan, Reza Tagiabadi, Reza Ahmadi, Fatemeh Shahriyari, Mohammad Emami
   Materials Testing, Vol. 2024, pp.1-13, 2024
3. "Improvement of Surface Mechanical and Tribological Characteristics of L-PBF Processed Commercially Pure Titanium through Ultrasonic Impact Treatment"
   Iman Ansarian, Reza Tagiabadi, Saeid Amini, Mohammad Hossein Mosallanejad, Luca Iuliano, Abdollah Saboori
   Acta Metallurgica Sinica-English Letters, Vol. 37, pp.1034-1046, 2024
4. "Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4Si alloy"
   Faezeh Akbari, Mahya Ghol karam, SHADAN BEYRAMI, Ghazal Abolghasem shirazi, Khatereh Manteshloo, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
   International Journal of Minerals Metallurgy and Materials, Vol. 31, pp.362-373, 2024
5. "Enhancing the corrosion behavior of Laser Powder Bed Fusion processed CP-Ti via Ultrasonic Peening"
   Iman Ansarian, Reza Tagiabadi, Saeid Amini, Abdollah Saboori
   MATERIALS LETTERS, Vol. 354, pp.1-4, 2024
6. "Improving tribological properties of CP-Ti by in-situ fabrication of Ti-WC surface composite using a pinless WC-Co stirring tool"
   Meisam Ashouri, Reza Tagiabadi, Mohammad Emami, Morteza Saghafiyazdi, Iman Ansarian
   Journal of Central South University, Vol. 31, pp.3688-3702, 2024
7. "Tribology characteristics of novel Zn-Si alloys severely deformed by multi-directional forging"
   Faezeh Akbari, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
   Archives of Civil and Mechanical Engineering, Vol. 24, pp.1-10, 2024
8. "Effect of Si Addition on the Weibull Distribution of Tensile Properties of Fe-bearing Al-Cu Alloys"
   SHAKIBA KHALESI, Reyhaneh Omidi, Reza Tagiabadi, M. Emami
   Silicon, Vol. 16, pp.4609-4620, 2024
9. "Assessment of Ce-rich intermetallics formation in Al-Cu-Mg-xCe alloys using thermal analysis cooling curves"
   Hossein Mohammadi, Reza Tagiabadi, M. Malekan
   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, Vol. 149, pp.7973-7985, 2024
10. "Effect of Severe Surface Plastic Deformation on Tribological Properties of CoCrWNi Super Alloys"
    Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeid Amini
    Iranian Journal of Materials Forming, Vol. 10, pp.22-34, 2023
11. "Effect of Cu addition on microstructure and corrosion behavior of Al-15Mg2Si composite"
    Leyla Hesami, Reza Tagiabadi, Mohammad Hossein Ghoncheh, Mohammad Emami, Morteza Saghafiyazdi
    Materials Testing, Vol. 65, pp.1-10, 2023
12. "Enhancing the tribological properties of pure Ti by pinless friction surface stirring"
    Meisam Ashouri, Mostafa Jafarzadgan, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 39, pp.3308-3320, 2023
13. "Using double ellipsoid heat source model for prediction of HAZ grain growth in GTAW of stainless steel 304"
    Mostafa Jafarzadgan, Reza Tagiabadi, Mohammad Ammar Mofid
    Materials Today Communications, Vol. 31, pp.1-7, 2022
14. "Study on the modification effect of copper on Al-15Mg(2)Si composite"
    Leyla Hesami, Reza Tagiabadi, M.H. Ghoncheh
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 276, pp.1-10, 2022
15. "Mechanical properties of Al-15Mg(2)Si composites prepared under different solidification cooling rates"
    Elahe Safari, Reza Tagiabadi, M. H. Ghoncheh
    International Journal of Minerals Metallurgy and Materials, Vol. 29, pp.1249-1260, 2022
16. "Effect of Cooling Rate on Microstructure and Mechanical Properties of AA5056 Al-Mg Alloy"
    Mehdi Aslezare, Reza Tagiabadi, M. H. Ghoncheh
    International Journal of Metalcasting, Vol. 16, pp.1533-1543, 2022
17. "Mechanical properties enhancement of Mg-4Si in-situ composites by friction stir processing"
    Reza Tagiabadi, Ali Moharrami
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 37, pp.66-77, 2021
18. "Tensile properties and hot tearing susceptibility of cast Al-Cu alloys containing excess Fe and Si"
    Khalil Ganjefard, Reza Tagiabadi, Mohammad Talafi Noghani, Mohammad Hossein Ghoncheh
    International Journal of Minerals Metallurgy and Materials, Vol. 28, pp.718-728, 2021
19. "Optimizing the mechanical properties of Al-4.5Cu-xSi alloys through multi-pass friction stir processing and post-process aging"
    Mohammad Mostafavi, Reza Tagiabadi, Mostafa Jafarzadgan
    Archives of Civil and Mechanical Engineering, Vol. 22, pp.1-15, 2021
20. "Effect of equal channel angular pressing on microstructure and mechanical properties of thermally-homogenized Al-Mg2Si composites"
    Mahdi Chegini, Mohammadhossin Shaeri, Reza Tagiabadi, S. Cheginy
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 259, pp.1-9, 2021
21. "Tribological properties improvement of conventionally-cast Al-8.5Fe-1.3V-1.7Si alloy by multi-pass friction stir processing"
    ZIBA NOURI HARZEVILI, Reza Tagiabadi
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 31, pp.1262-1275, 2021
22. "Enhancing the Mechanical Properties of Si Particle Reinforced ZA22 Composite by Ti-B Modification"
    Davood Youefi, Reza Tagiabadi, Mohammadhossin Shaeri,
    International Journal of Metalcasting, Vol. 15, pp.206-215, 2021
23. "Quality Index Assessment of Multi-Pass Friction Stir Processed Al-Si-Mg Alloys Fully Produced by Recycling of Machining Chips"
    Reza Tagiabadi, Hamed Jalali
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 74, pp.273-284, 2021
24. "Tribological Properties of Surface Friction Hardened AISI 316L Steel"
    Alireza Khaksaran, Reza Tagiabadi, Mostafa Jafarzadgan
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 75, pp.1979-1989, 2021
25. "Effect of multi-pass multi-directional forging on tribological properties of Si-rich eutectoid ZA alloys"
    Davood Youefi, Reza Tagiabadi, Mohammadhossin Shaeri
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 31, pp.2024-2038, 2021
26. "Increasing the recycling percent in liquid-state recycling of Al machining chips by friction stir processing"
    Reza Tagiabadi, ALI MOHAMMADALI ROSTAMABADI, Shahab Tasvibi tanha, Mohammadhossin Shaeri
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 243, pp.1-8, 2020
27. "Mechanical properties enhancement of cast Al-8.5Fe-1.3V-1.7Si (FVS0812) alloy by friction stir processing"
    ZIBA NOURI HARZEVILI, Reza Tagiabadi, M. Moazami-Goudarzi
    Archives of Civil and Mechanical Engineering, Vol. 20, pp.1-10, 2020
28. "Tribological behavior of friction stir processed SiP/ZA40 in-situ composites"
    Fateme Rajabi dehaki, Reza Tagiabadi, Mohammadhossin Shaeri
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 30, pp.3043-3057, 2020
29. "Enhancing the mechanical and tribological properties of Mg2Si-rich aluminum alloys by multi-pass friction stir processing"
    Ali Moharrami, Ahmad Razaghian Arani, Moslem Paidar, Michaela Slapakova, Olatunji Oladimeji Ojo, Reza Tagiabadi
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 250, pp.1-15, 2020
30. "Effect of cell imprinting on viability and drug susceptibility of breast cancer cells to doxorubicin"
    Fatemeh Shahriari, Mohsen Janmaleki, Shahriar Sharifi, Milad Eyvazi Hesar, Sasha Hoshian, Reza Tagiabadi, Ahmad Razaghian Arani, Majid Ghadiri, Afshin Peirovi, Morteza Mahmoudi, Amir Sanati Nezhad, Ali Khademhosseini
    Acta Biomaterialia, Vol. 113, pp.119-129, 2020
31. "Tribology of Si-rich TIG-deposited coatings on Zn-40Al-2Cu alloy"
    Fateme Rajabi dehaki, Reza Tagiabadi, Mohammadhossin Shaeri
    SURFACE ENGINEERING, Vol. 36, pp.735-744, 2020
32. "Heat Input Effect on Microstructure and Mechanical Properties in Shielded Metal Arc Welding of Dissimilar AISI 316L/St-37 Steel"
    Majid Ahangaryan, Mostafa Jafarzadgan, Reza Tagiabadi
    International Journal of Iron and Steel Society of Iran, Vol. 17, pp.1-10, 2020
33. "Microstructural evolution and mechanical properties of multi-directionally forged Si-P/ZA22 composite"
    Davood Youefi, Reza Tagiabadi, Mohammadhossin Shaeri, Iman Ansarian
    Archives of Civil and Mechanical Engineering, Vol. 20, pp.1-10, 2020
34. "Investigating the combination effect of warm extrusion and multi-directional forging on microstructure and mechanical properties of Al-Mg2Si composites"
    Mehdi Sharifzadeh, Mohammadhossin Shaeri, Reza Tagiabadi, F. Mozaffari, M. Ebrahimi
    Archives of Civil and Mechanical Engineering, Vol. 20, pp.1-10, 2020
35. "Improving mechanical properties of Mn-added hypoeutectic Al-4Ni alloy by friction stir processing"
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 29, pp.460-472, 2019
36. "Effect of Ca additions on evolved microstructures and subsequent mechanical properties of a cast and hot-extruded Mg-Zn-Zr magnesium alloy"
    Samiraa Moradnezhad, Ahmad Razaghian Arani, Reza Tagiabadi, H. R. Abedi, A. Salandari-Rabori, M. Emamy
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 104, pp.4265-4275, 2019
37. "Effect of Oxide Bifilms on the Fracture Behavior of AM60B Mg Alloy"
    Reza Tagiabadi, Amir hossein Shevidi, Ahmad Razaghian Arani,
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 73, pp.275-283, 2019
38. "Improving the Tribological Properties of Al-7Fe-5Ni Alloys via Friction Stir Processing"
    Mojtaba Fekriesoostani, Reza Tagiabadi, Mostafa Jafarzadgan, Fatemeh Shahriari, Aida Rahmani
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol. 141, 2019
39. "The Correlation of Microstructure and Mechanical Properties of In-Situ Al-Mg2Si Cast Composite Processed by Equal Channel Angular Pressing"
    Mahdi Chegini, Mohammadhossin Shaeri, Reza Tagiabadi, sajjad chegini, djavanroodi faramarz
    Materials, Vol. 12, pp.1-12, 2019
40. "Investigation of Ca in the Microstructural Evolution and Porosity Analysis of ZK60 alloy in as-cast and extruded conditions"
    Samiraa Moradnezhad, Ahmad Razaghian Arani, M. Emamy, Reza Tagiabadi
    Iranian Journal of Materials Forming, Vol. 6, pp.24-31, 2019
41. "Effect of Tool Pin Profile on the Microstructure and Tribological Properties of Friction Stir Processed Al-20 wt% Mg2Si Composite"
    Ali Moharrami, Ahmad Razaghian Arani, M. Emamy, Reza Tagiabadi
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol. 141, pp.1-10, 2019
42. "Statistical Strength Analysis of Dissimilar AA2024-T6 and AA6061-T6 Friction Stir Welded Joints"
    Reza Tagiabadi,
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 28, pp.1822-1832, 2019
43. "Synthesis of Aluminum- CNTs Composites Using Double-Pressing Double-Sintering Method (DPDS)"
    Akbar Yarahmadi, Masoud Rajabi, Mohammad Talafi Noghani, Reza Tagiabadi
    Journal of Nanostructures, Vol. 9, pp.94-102, 2019
44. "Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast Al-7Fe-5Ni alloy"
    Mojtaba Fekriesoostani, Reza Tagiabadi, Mostafa Jafarzadgan, Maryam Vasheghani Farahani
    Materials Research Express, Vol. 6, pp.1-25, 2019
45. "Effect of partial substitution of Mn for Ni on mechanical properties of friction stir processed hypoeutectic Al-Ni alloys"
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, Vol. 49, pp.3007-3018, 2018
46. "Effect of Fe-impurity on tribological properties of Al-15Mg(2)Si composite"
    , Reza Tagiabadi, Ahmad Razaghian Arani, Mohammad Talafi Noghani, mohammadhosein ghoncheh
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 28, pp.1084-1093, 2018
47. "Investigation of the Tribological Properties of AlxSi-1.2Fe(Mn) (x=5-13 wt.%) Alloys"
    , Reza Tagiabadi, Fatemeh Shahriari
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 27, pp.3323-3334, 2018
48. "Quality index and hot tearing susceptibility of Al-7Si-0.35Mg-xCu alloys"
    Reza Tagiabadi, Alireza Fayegh, Arefeh Pakbin, M. NAZARI, M.H. GHONCHEH
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 28, pp.1275-1286, 2018
49. "Effect of friction hardening on the surface mechanical properties and tribological behavior of biocompatible Ti-6Al-4V alloy"
    Fatemeh Shahriari, Reza Tagiabadi, Ahmad Razaghian Arani, Morteza Mahmoudi
    Journal of Manufacturing Processes, Vol. 31, pp.776-786, 2018
50. "Weibull analysis of effect of T6 heat treatment on fracture strength of AM60B magnesium alloy"
    Amir hossein Shevidi, Reza Tagiabadi, Ahmad Razaghian Arani
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 28, pp.20-29, 2018
51. "Effect of friction hardening pre-treatment on increasing cytocompatibility of alkali heat-treated Ti-6Al-4V alloy"
    Fatemeh Shahriari, Ahmad Razaghian Arani, Reza Tagiabadi, Afshin Peirovi, A. Amini
    SURFACE and COATINGS TECHNOLOGY, Vol. 353, pp.148-157, 2018
52. "Effect of Mn Modification on the Tribological Properties of In Situ Al-15Mg(2)Si Composites Containing Fe as an Impurity"
    , Reza Tagiabadi, Ahmad Razaghian Arani
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol. 140, 2018
53. "Effect of Be Modification on the Oxide Bifilms and Tensile Strength Reliability of Al-Si-Mg Alloys Containing Excess Fe"
    , Reza Tagiabadi, M. Karimzadeh, M. H. Ghoncheh
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, Vol. 49, pp.1236-1245, 2018
54. "Microstructure, Texture, Electrical and Mechanical Properties of AA-6063 Processed by Multi Directional Forging"
    Alireza Dashti, Mohammadhossin Shaeri, Reza Tagiabadi, faramarz djavanroodi, farzaneh vali ghazvini, hamid javadi
    Materials, Vol. 11, pp.1-17, 2018
55. "Effect of Bifilm Oxides on the Dry Sliding Wear Behavior of Fe-Rich Al-Si Alloys"
    Nooshin Akaberi, Reza Tagiabadi, Ahmad Razaghian Arani
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol. 139, pp.1-10, 2017
56. "Investigation on beneficial effects of beryllium on entrained oxide films mechanical properties and casting reliability of Fe-rich Al Si cast alloy"
    , Reza Tagiabadi, mahdi karimzadeh, mahammad hesein ghoncheh
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 31, pp.506-512, 2015
57. "Dry sliding wear behaviour of hypoeutectic Al Si alloys containing excess iron"
    Reza Tagiabadi, hamid reza ghasemi
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 25, pp.1017-1022, 2009
58. "Effect of iron-rich intermetallics on the sliding wear behavior of Al Si alloys"
    Reza Tagiabadi, hamid reza ghasemi, saeed shabestari
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 490, pp.162-170, 2008
59. ""
    Mostafa Jafarzadgan, Reza Tagiabadi, Mohammad Amar mofid, Ayoob Saeedinezhad
    2024
60. "An Investigation on the Effect of Grain Refinement on the Fluidity and Hot Tearing Susceptibility of Ce-Modified 2024 Al Alloy"
    Hossein Mohammadi, Reza Tagiabadi, Mehdi Malekan
    Vol. 6, pp.195-202, 2023
61. "The Effect of Surface Severe Plastic Deformation on Microstructure and Mechanical Properties of Pure Titanium Produced by Selective Laser Melting"
    Iman Ansarian, Reza Tagiabadi, Saeed Amini, Abdollah Sabouri
    Vol. 7, pp.15-24, 2023
62. "Investigation of Effect of Mechanical Vibration During Solidification on Microstructure and Wear Properties of Zn-4Si Composite"
    Faezeh Akbari, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    Vol. 6, pp.1-10, 2022
63. ""
    Faezeh Akbari, Reza Tagiabadi, Morteza Saghafiyazdi, Iman Ansarian
    Vol. 6, pp.157-167, 2022
64. ""
    Mohammad Mostafavi, Mostafa Jafarzadgan, Reza Tagiabadi
    Vol. 4, pp.215-226, 2021
65. "Effect of severe plastic deformation by multidirectional forging on mechanical properties of Ti modified SiP/ZA22 composite"
    Davood Youefi, Reza Tagiabadi, Mohammadhossin Shaeri
    Vol. 21, pp.707-718, 2021
66. "Effect of Ti and multidirectional forging on shear mechanical properties of in-situ ZA22-4Si composite"
    Davood Youefi, Reza Tagiabadi, Mohammadhossin Shaeri
    Vol. 24, pp.122-132, 2021
67. ""
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi
    Vol. 5, pp.51-62, 2021
68. "Simulation of heat transfer in gas tungsten arc welding of stainless steel type 304"
    Mostafa Jafarzadgan, Reza Tagiabadi, Mohammad Ammar Mofid
    Vol. 23, pp.74-83, 2020
69. "Effect of Si and Fe on thermal modification behavior of Al-4.5Cu-xSi-yFe"
    Khalil Ganjefard, Reza Tagiabadi, Mohammad Talafi Noghani
    Vol. 23, pp.255-269, 2020
70. ""
    Leyla Hesami, Reza Tagiabadi
    Vol. 3, pp.217-227, 2020
71. ""
    Elahe Safari, Reza Tagiabadi
    Vol. 4, pp.79-87, 2020
72. "Improving the Mechanical Properties of Mn-rich Al-4Ni-4Mn Alloy by Increasing the Solidification Rate and Friction Stir Processing"
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi
    Vol. 19, pp.2176-2182, 2019
73. ""
    Alireza Dashti, Mohammadhossin Shaeri, Reza Tagiabadi
    Vol. 8, pp.73-86, 2018
74. "Effect of Modifier Elements on Quality Index Improvement of A356 Aluminum Alloy Before and After T6 Heat Treatment"
    , Reza Tagiabadi, Maryam Nazari
    Vol. 2, pp.11-25, 2018
75. "Improving the mechanical properties of Al-Ni-Fe alloys through friction stir processing"
    Mojtaba Fekriesoostani, Reza Tagiabadi, Mostafa Jafarzadgan
    Vol. 20, pp.121-131, 2017
76. ""
    Reza Tagiabadi, Mohammad Talafi Noghani, Yalda Karimi abadi, Mahsa Iranshahi, Maryam Nazari
    Vol. 11, pp.65-75, 2017
77. ""
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi
    Vol. 1, pp.69-78, 2017
78. ""
    Samiraa Moradnezhad, Ahmad Razaghian Arani, M Emammy, Reza Tagiabadi
    Vol. 1, pp.2-10, 2016
79. "Quantitative investigation of hot tearing sensitivity in Al-9Si-Fe(Mn) alloys"
    Reza Tagiabadi, ,
    Vol. 19, pp.195-205, 2016
80. ""
    Reza Tagiabadi, , maryam nazari
    pp.13-22, 2015
81. ""
    , Reza Tagiabadi, saeed ghodrat nama shabestari
    pp.85-95, 2015
82. ""
    akbar eshaghi, Reza Tagiabadi, hamidreza ghasemi
    pp.1-10, 2012

Conference Paper

1. "The surface hardening of Haynes 25 super alloy using sever surface plastic deformation method"
   Rahim Nemati, Reza Tagiabadi, Morteza Saghafiyazdi, Saeed Amini
   10th international conference on mechanical engineering, materials and metallurgy, 2023
2. "Effect of process parameters on the hardness and wear properties of friction stir processed Al-Fe-Ni alloy"
   Mojtaba Fekriesoostani, Reza Tagiabadi, Mostafa Jafarzadgan, Iman Ansarian
   5th International Conference On Mechanical Engineering, Materials and Metallurgy, No 1 , pp.1-10, 2021
3. "Effect of carbide distribution on the sliding wear behavior of DIN 55Cr3 steel"
   Masoud Ghorbanzadeh, Reza Tagiabadi, Iman Ansarian
   5th International Conference On Mechanical Engineering, Materials and Metallurgy, No 1 , pp.1-10, 2021
4. "surface properties of Ti6Al4V modified by simple thermo-chemical modifications"
   Fatemeh Shahriari, Reza Tagiabadi, Ahmad Razaghian Arani
   8th international conference on advances in engineering and technology (RTET-2018), 2018
5. "Investigation of Ca on the microstructural evolution"
   Samiraa Moradnezhad, Ahmad Razaghian Arani, M. Emamy, Reza Tagiabadi
   , No 5 , pp.1-10, 2016
6. "Influence of Temperature and Pressure on Mechanical properties of CNTs Reinforced Aluminum Nano-composites Fabbricated by Double-pressing Double-sintering Method"
   Akbar Yarahmadi, Masoud Rajabi, Mohammad Talafi Noghani, Reza Tagiabadi
   Iran International Aluminum Conference(IIAC2016), pp.1-6, 2016
7. "Al-CNTs Nano-composite Produced f Via Double-pressing Double-sintering Method"
   Akbar Yarahmadi, Masoud Rajabi, Mohammad Talafi Noghani, Reza Tagiabadi
   Iran International Aluminum Conference(IIAC2016), 2016
8. ""
   Mahdi Chegini, Reza Tagiabadi, Mohammadhossin Shaeri, Iman Ansarian
   , 2024
9. ""
   Mahdi Chegini, Reza Tagiabadi, Mohammadhossin Shaeri, Iman Ansarian
   , No 1 , pp.1-10, 2024
10. ""
    Hamed Jalali, Reza Tagiabadi, Iman Ansarian
    , 2022
11. ""
    Mahdi Chegini, Reza Tagiabadi, Mohammadhossin Shaeri, Iman Ansarian
    , 2022
12. ""
    ZIBA NOURI HARZEVILI, Reza Tagiabadi, Iman Ansarian
    , pp.1-10, 2022
13. ""
    Fateme Yousefi, Reza Tagiabadi, Saeid Baghshahi, Iman Ansarian
    , No 1 , pp.1-5, 2021
14. "Effects of Calcium Addition on mechanical properties of Mg-6 Zn-0.7 Zr Alloy in As-cast condition"
    Samiraa Moradnezhad, Ahmad Razaghian Arani, M. Emamy, Reza Tagiabadi
    , 2016
15. "An investigation on the effect of entrained oxide bifilms and solutionizing time on the hardness and tensile strength og hypoeutectic Al-Si-Mg alloys"
    Reza Tagiabadi, Maryam Nazari, Farzaneh Shamsi, Mona Keshtdar
    , 2016
16. ""
    Alireza Khaksaran, Reza Tagiabadi, Mohammad Talafi Noghani, Mostafa Jafarzadgan
    , 2015
17. "Effect of grain refining and modification on mechanicla properties of Al - Si - Mg alloys with different Fe content"
    Mohammad Talafi Noghani, Reza Tagiabadi
    3th international Engineering Materials Metallurgy Conference, 2014
18. ""
    Nooshin Akaberi, Reza Tagiabadi, Ahmad Razaghian Arani
    , 2013
19. ""
    Nooshin Akaberi, Reza Tagiabadi
    , 2013
20. ""
    Mohammad Talafi Noghani, Reza Tagiabadi
    , No 3 , pp.1-10, 2008