menu
Mahdi Soltanpour

Associate Professor

Update: 2025-04-02

Mahdi Soltanpour (Faculty Member)

Technical & Engineering /

Journal Paper

  1. "High-speed joining of tubes to panel sheets using electro-hydraulic forming"
    Vahid Babalo, Mohammadreza Mirzahosein, Ali Fazli, Mahdi Soltanpour
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 119, pp.4713-4731, 2022
  2. "Formability study and metallurgical properties analysis of FSWed AA 6061 blank by the SPIF process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    SN Applied Sciences, Vol. 3, pp.1-23, 2021
  3. "Experimental study of the mechanical performance of the new high-speed mechanical clinching"
    Vahid Babalo, Ali Fazli, Mahdi Soltanpour
    International Journal of Lightweight Materials and Manufacture, Vol. 4, pp.218-236, 2021
  4. "Simple shear forging as a method for severe plastic deformation"
    Mohammad Rahimi Goloojeh, Mahdi Soltanpour
    International Journal of Lightweight Materials and Manufacture, Vol. 4, pp.165-178, 2021
  5. "Processing and tooling considerations in joining by forming technologies; part B-friction-based welding"
    Masoud Salamati, Mahdi Soltanpour, Ali Fazli
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 106, pp.4023-4081, 2020
  6. "A study on the electro-hydraulic clinching of aluminum and carbon fiber reinforced plastic sheets"
    Hossein Ghorbani Menghari, Vahid Babalo, Ali Fazli, Mahdi Soltanpour, Hamed Ziaeipoor
    International Journal of Lightweight Materials and Manufacture, Vol. 3, pp.239-249, 2020
  7. "Improvement in joint strength and material joinability in clinched joints by electromagnetically assisted clinching"
    Masoud Salamati, Mahdi Soltanpour, Asghar Zajkani, Ali Fazli
    Journal of Manufacturing Processes, Vol. 41, pp.252-266, 2019
  8. "Electromagnetically activated high-speed hydroforming process: A novel process to overcome the limitations of the electromagnetic forming process"
    Rasoul Jelokhani niyaraki, Ali Fazli, Mahdi Soltanpour
    CIRP Journal of Manufacturing Science and Technology, Vol. 27, pp.21-30, 2019
  9. "Processing and tooling considerations in joining by forming technologies; part Amechanical joining"
    Masoud Salamati, Mahdi Soltanpour, Ali Fazli, Asghar Zajkani
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 101, pp.261-315, 2019
  10. "High speed circular hemming; a novel joining process for thin and low-ductile sheets"
    Vahid Babalo, Mahdi Soltanpour, Ali Fazli
    THIN-WALLED STRUCTURES, Vol. 142, pp.98-115, 2019
  11. "Formability analysis of dissimilar friction stir welded AA 6061 and AA 5083 blanks by SPIF process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    CIRP Journal of Manufacturing Science and Technology, Vol. 25, pp.50-68, 2019
  12. "Forming of closed-cell aluminum foams under thermal loadings: experimental investigation"
    Amir H. Roohi, H. Moslemi Naeini, M. Hoseinpour Gollo, Mahdi Soltanpour, S. Bruschi, A. Ghiotti
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 95, pp.3919-3928, 2018
  13. "Microstructure and mechanical property improvement of X70 in asymmetrical thermomechanical rolling"
    Nabi alah Razani, Bijan Mollaei Dariani, Mahdi Soltanpour
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 97, pp.3981-3997, 2018
  14. "Electro-Hydraulic Clinching a novel high speed joining process"
    Vahid Babalo, Ali Fazli, Mahdi Soltanpour
    Journal of Manufacturing Processes, Vol. 35, pp.559-569, 2018
  15. "Analytical approach of asymmetrical thermomechanical rolling by slab method"
    N. A. Razani, B. Mollaei Dariani, Mahdi Soltanpour
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 94, pp.175-189, 2018
  16. "Free transverse vibration analysis of size dependent Timoshenko FG cracked nanobeams resting on elastic medium"
    Mahdi Soltanpour, Majid Ghadiri, Ali Yazdi, Mohsen Safi samgh abadi
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 23, pp.1813-1830, 2017
  17. "Height prediction of dome-shaped products in laser forming process"
    Sh. Imani Shahabad, H. Moslemi Naeini, Amir H. Roohi, Mahdi Soltanpour, A. Tavakoli
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 88, pp.2227-2236, 2017
  18. "Studying the influence of surface effects on vibration behavior of size-dependent cracked FG Timoshenko nanobeam considering nonlocal elasticity and elastic foundation"
    Majid Ghadiri, Mahdi Soltanpour, Ali Yazdi, Mohsen Safi samgh abadi
    APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING, Vol. 122, pp.1-21, 2016
  19. "On the random-based closed-cell metal foam modeling and its behavior in laser forming process"
    , Amir H. Roohi, , Mahdi Soltanpour,
    OPTICS AND LASER TECHNOLOGY, Vol. 72, pp.53-64, 2015
  20. "Experimental investigation of the joinability of three-layer aluminum/ polymer/ aluminum composite sheets by the clinching process"
    Rasoul Naderli, Ali Fazli, Mahdi Soltanpour, Parviz Asadi
    Vol. 8, pp.27-38, 2021
  21. "The effect of the die geometry on the joint strength of Al 3105 aluminum sheets joined by the clinching process"
    Mohammad hosein Mirzaei, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 7, pp.10-23, 2021
  22. ""
    Majid Zia, Ali Fazli, Mahdi Soltanpour
    Vol. 15, pp.91-102, 2019
  23. ""
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 26, pp.22-39, 2018
  24. "Experimental and numerical investigation of the formability of friction stir welded 5083 aluminum alloy sheets in single point incremental forming process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 18, pp.45-55, 2018
  25. ""
    Amir hossein Roohi, Moslemi Naeini Hasan, H. Gollo Mohammad, Mahdi Soltanpour
    pp.33-44, 2015

Conference Paper

  1. "Warm Electrohydraulic Forming A Novel High Speed Forming Process"
    Majid Zia, Ali Fazli, Mahdi Soltanpour
    12th International Conference on Technology of Plasticity, No 207 , pp.323-328, 2017
  2. "High speed hydroforming and direct quenching An alternative method for production of hot stamped parts with high productivity"
    Mahdi Soltanpour, Ali Fazli, Rasoul Jelokhani niyaraki
    12th International Conference on Technology of Plasticity, No 207 , pp.317-322, 2017
  3. "Optimization of Fan Geometry for Urban Train Traction Motors Using Coupled Numerical Electromagnetic and Thermal Analysis"
    Mahdi Soltanpour, Ali Rajabpour
    4th International Conference on Recent Advances in Railway Engineering (ICRARE2015), 2015
  4. "A Novel Method for single pass production of bulk nanostructured metals"
    Mahdi Soltanpour, Ali Fazli, Mohammad moein Navaei
    Proceedings of the 5th International Conference on Nanostructures (ICNS5), 2014
  5. ""
    Keyvan Soleymanpour, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    , pp.1-6, 2019
  6. ""
    Samaneh Alimohammaditatar, Mahdi Soltanpour, Ali Fazli, Parviz Asadi
    , 2019
  7. ""
    Rasul Shenavar saf sary, Ali Fazli, Mahdi Soltanpour
    , pp.1-10, 2017
  8. ""
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    , pp.1-9, 2017
  9. ""
    Nasrollah Misaghiasl, Ali Fazli, Mahdi Soltanpour
    , pp.1-11, 2017
  10. ""
    Rasoul Jelokhani niyaraki, Ali Fazli, Mahdi Soltanpour
    24th International Conference on Mechanical Engineering, 2016
  11. ""
    Amir hosein Khademi, Hamid Reza Nazif, Ali Rajabpour, Mahdi Soltanpour
    2nd Internationbal conference on Nonlinear Analysis and Optimization, pp.1-14, 2016
  12. ""
    Majid Zia, Ali Fazli, Mahdi Soltanpour
    , pp.1-11, 2015
  13. ""
    Farzad Ebrahimi Fardshad kohanzad, Mahdi Soltanpour, Seyysd hamed Seyyed hosseini
    , 2015
  14. ""
    Mahdi Soltanpour, Mohamadreza Kokaba, Mohammad moein Navaei
    2nd National Conference on Applied Researches in Electrical Mechanical and Mechatronics Engineering, 2015
  15. ""
    Mahdi Soltanpour,
    2nd National Conference on Applied Researches in Electrical Mechanical and Mechatronics Engineering, 2015