Mohammad Talafi Noghani (Former Faculty Member)

Journal Paper

1. "Investigation of tribological behavior for IN625 coating on IN738 superalloy by laser cladding process"
   Amirhossein Aboutorabi sani, Morteza Saghafiyazdi, Mohammad Talafi Noghani, Morteza Taheri,
   Emergent Materials, pp.1-18, 2024
2. "Synthesis of binder-free hybrid Ni-Co-Se@NiS2 nanostructures as highly active and durable electrocatalyst for hydrogen evolution reaction in alkaline media and Seawater"
   Sina Jamali, Mohammad Abedini mohammadi, Morteza Saghafiyazdi, Mohammad Talafi Noghani, , Mohammad Rezayat, Miguel Morales
   JOURNAL OF ELECTROANALYTICAL CHEMISTRY, Vol. 969, pp.118527-118540, 2024
3. "Effect of Lateral Laser-Cladding Process on the Corrosion Performance of Inconel 625"
   Mohamad Rezayat, Amirhossein Aboutorabi sani, Mohammad Talafi Noghani, Morteza Saghafiyazdi, Morteza Taheri, , Mohammad Abedini mohammadi, Mahmoud Moradi, Antonio Manuel Mateo Garcia, Hossein Besharatloo
   Metals, Vol. 13, pp.1-16, 2023
4. "Antibacterial activity of the Iron-Zinc Oxide nanoparticles synthesized via electric discharge method"
   Fereshteh Shahbazi, Reza Ahmadi, Mohammad Talafi Noghani, Gholamreza Karimi
   International Journal of Nano Dimension, Vol. 1, pp.60-72, 2023
5. "Synthesis and optimization of Mo-Ni-Se@NiSe core-shell nanostructures as efficient and durable electrocatalyst for hydrogen evolution reaction in alkaline media"
   Mohammad Abedini mohammadi, Morteza Saghafiyazdi, Mohammad Talafi Noghani, , Seiedali Hosseini
   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 47, pp.34455-34470, 2022
6. "Production and characterization of high-performance cobalt-nickel selenide catalyst with excellent activity in HER"
   Fateh Ahmadyan, Vahid Salarvand, Morteza Saghafiyazdi, Mohammad Talafi Noghani, Ali Yousefi far
   Journal of Materials Research and Technology-JMR and T, Vol. 15, pp.3942-3950, 2021
7. "Effect of synthesis conditions on the morphology, composition and magnetic properties of the iron oxide nanoparticles prepared via electric discharge method"
   Fereshteh Shahbazi, Mohammad Talafi Noghani, Reza Ahmadi
   JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 536, pp.1-8, 2021
8. "Tensile properties and hot tearing susceptibility of cast Al-Cu alloys containing excess Fe and Si"
   Khalil Ganjefard, Reza Tagiabadi, Mohammad Talafi Noghani, Mohammad Hossein Ghoncheh
   International Journal of Minerals Metallurgy and Materials, Vol. 28, pp.718-728, 2021
9. "Synthesis, Characterization and Investigation of Hydrogen Evolution Activity of Ni-Mo/Al2O3 Composite"
   Vahid Salarvand, Hassan Mahmoodi, Fateh Ahmadyan, Nastaran Farahbakhsh, Ali Yousefi far, Morteza Saghafiyazdi, Mohammad Talafi Noghani
   ChemistrySelect, Vol. 5, pp.1-7, 2020
10. "Synthesis of Aluminum- CNTs Composites Using Double-Pressing Double-Sintering Method (DPDS)"
    Akbar Yarahmadi, Masoud Rajabi, Mohammad Talafi Noghani, Reza Tagiabadi
    Journal of Nanostructures, Vol. 9, pp.94-102, 2019
11. "Creep behavior of solid solutioned and annealed Al-7075 alloy processed by equal channel angular pressing"
    Fatemeh Shahriari, Mohammadhossin Shaeri, Fatemeh Bavarsiha, Mohammad Talafi Noghani
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 765, pp.1-9, 2019
12. "Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling"
    Vahid Salarvand, Morteza Saghafiyazdi, Mohammad Talafi Noghani
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 52, pp.164-174, 2019
13. "Fatigue behavior of AA7075 Aluminium alloy severely deformed by equal channel angular pressing"
    Arezoo Esmaeili, Mohammadhossin Shaeri, Mohammad Talafi Noghani, Ahmad Razaghian Arani
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 757, pp.324-332, 2018
14. "Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy"
    Morteza Saghafiyazdi, Mohammad Talafi Noghani, ALIREZA NAJJARi
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 51, pp.153-162, 2018
15. "The Effect of Sintering temperature on CU-CNTs nano-composites properties Produced by PM Method"
    Marjan Darabi, Masoud Rajabi, Behzad Janipour, Mohammad Talafi Noghani
    SCIENCE OF SINTERING, Vol. 50, pp.477-486, 2018
16. "Effect of Fe-impurity on tribological properties of Al-15Mg(2)Si composite"
    , Reza Tagiabadi, Ahmad Razaghian Arani, Mohammad Talafi Noghani, mohammadhosein ghoncheh
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 28, pp.1084-1093, 2018
17. "Properties of Al/(Al2O3 TiB2 ZrB2) hybrid composite manufactured by powder metallurgy and hot pressing"
    , Arman Sedghi, Mohammad Talafi Noghani
    Journal of Applied Mechanics and Technical Physics, Vol. 58, pp.458-460, 2017
18. "Effect of carbon nanotube content and double-pressing double-sintering method on the tensile strength and bending strength behavior of carbon nanotube-reinforced aluminum composites"
    Akbar Yarahmadi, Mohammad Talafi Noghani, Masoud Rajabi
    JOURNAL OF MATERIALS RESEARCH, Vol. 31, pp.3860-3868, 2016
19. "Effect of Mn addition on Fe-rich intermetallics morfology and dry sliding wear investigation of hypereutectic Al-17.5 Si allys"
    , , Mohammad Talafi Noghani
    journal of materials research and technology, Vol. 3, pp.5-15, 2015
20. "The effect of removing worn particles by ultrasonic cleaning on the wear characterization of LM13 alloy"
    , , , Mohammad Talafi Noghani
    Surface engineering and applied electrochemistry, Vol. 51, pp.382-388, 2015
21. "An Overview of Stray Current Control in DC Railway Systems"
    Mohammad Talafi Noghani
    pp.1-12, 2006
22. "Investigation of Electrochemical Properties of Cobalt Phospho Selenide Nanostructured Electrode in Hydrogen Evolution Reaction"
    Nafisehsadat Miran, Morteza Saghafiyazdi, Mohammad Talafi Noghani,
    Vol. 11, pp.46-59, 2023
23. "Acoustic damping performance of aluminum nanocomposite foams with different additive of carbon nanotubes and comparison that with conventional rockwool"
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi, akbar ghasemi
    Vol. 10, pp.81-88, 2022
24. ""
    Fereshteh Shahbazi, Reza Ahmadi, Mohammad Talafi Noghani, Gholamreza Karimi
    Vol. 17, pp.72-80, 2021
25. "Experimental comparison of sound transmission loss in pure aluminum and aluminum composite foams with 3wt% carbon nanotube and graphene nanoplate"
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    Vol. 9, pp.91-99, 2021
26. "Evaluation of the Microstructure and Mechanical Properties of Dissimilar Joint between Pure Copper and Stainless Steel 316"
    Mostafa Jafarzadgan, Reza Ahmadi, Mohammad Talafi Noghani, Ahmad Miri
    Vol. 32, pp.11-26, 2021
27. "Effect of Si and Fe on thermal modification behavior of Al-4.5Cu-xSi-yFe"
    Khalil Ganjefard, Reza Tagiabadi, Mohammad Talafi Noghani
    Vol. 23, pp.255-269, 2020
28. "Investigation of the effect of electrolyte on acoustical behaviour of ceramic coatings produced by method Plasma Electrolytic Oxidation (PEO) on titanium"
    Abbas Bahreini, ali eyvaz zadeh, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    Vol. 8, pp.7-13, 2020
29. "Microstructure, Mechanical, and Electrical Properties of Cu-30Zn Alloys Produced by Multi-Directional Forging. Modares Mechanical Engineering"
    Ziba Zarei, Mohammad Talafi Noghani, Mohammadhossin Shaeri, Iman Ansarian
    Vol. 19, pp.1943-1952, 2019
30. "Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite"
    SHIVA MORADI, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 51, pp.13-19, 2018
31. ""
    Mohammad Talafi Noghani, Mohammadhossin Shaeri, Arezoo Esmaeili, Ahmad Razaghian Arani
    Vol. 17, pp.11-20, 2018
32. "Investigation of Bacteriation Properties of Copper-Tin Nanocrystalline Alloys Produced by Mechanical Alloys"
    Mohamad Rezayat, Mohammad Talafi Noghani, Morteza Saghafiyazdi, Reza Ahmadi
    Vol. 7, pp.29-41, 2018
33. ""
    Reza Tagiabadi, Mohammad Talafi Noghani, Yalda Karimi abadi, Mahsa Iranshahi, Maryam Nazari
    Vol. 11, pp.65-75, 2017
34. ""
    Mohammad Talafi Noghani,
    pp.45-50, 2006
35. ""
    Mohammad Talafi Noghani
    pp.1-9, 2005

Conference Paper

1. "Al-CNTs Nano-composite Produced f Via Double-pressing Double-sintering Method"
   Akbar Yarahmadi, Masoud Rajabi, Mohammad Talafi Noghani, Reza Tagiabadi
   Iran International Aluminum Conference(IIAC2016), 2016
2. "Influence of Temperature and Pressure on Mechanical properties of CNTs Reinforced Aluminum Nano-composites Fabbricated by Double-pressing Double-sintering Method"
   Akbar Yarahmadi, Masoud Rajabi, Mohammad Talafi Noghani, Reza Tagiabadi
   Iran International Aluminum Conference(IIAC2016), pp.1-6, 2016
3. "Fatique behaviour of ultrafine grained Al-7075 alloy produced by equal channel angular pressing (ECAP)"
   Arezoo Esmaeili, Mohammad Talafi Noghani, Mohammadhossin Shaeri, Ahmad Razaghian Arani
   5th international biennial conference on ultrafine grained and nanostructured materials UFGNSM, 2015
4. "The Effect of La addition on the microstructure and tensile properties of hot-extruded Al-15 Mg2SI Composite"
   Mohammad Talafi Noghani, Ali asqar,
   4th international engineering materials metallurgy conference, 2015
5. "Wear Reduction of the Wheels of Ukranian Open Top Cars in Isfahan"
   Mohammad Talafi Noghani
   حمل و نقل اوكراين, 2000
6. ""
   Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi, Akbar Ghasemi yeklangi
   , pp.1-8, 2023
7. ""
   Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi, Akbar Ghasemi yeklangi
   , 2023
8. ""
   Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi, Akbar Ghasemi yaklangi
   , pp.1-5, 2023
9. ""
   Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi, akbar ghasemi yekelangi
   , pp.1-8, 2022
10. ""
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    , 2021
11. ""
    Abbas Bahreini, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    , 2021
12. ""
    Amir Agha jafari, Mohammad Talafi Noghani, Morteza Saghafiyazdi, bostani behruz
    , 2019
13. ""
    Fateh Ahmadyan, vahid salarvand, Morteza Saghafiyazdi, Mohammad Talafi Noghani
    , pp.1-12, 2019
14. ""
    Abolfazl Akbari, Mohammad Talafi Noghani, Mostafa Jafarzadgan
    , 2018
15. ""
    Vahid Salarvand, Mohammad Talafi Noghani, Morteza Saghafiyazdi
    , 2017
16. ""
    Akbar Yarahmadi, Masoud Rajabi, Mohammad Talafi Noghani
    , pp.1-10, 2016
17. ""
    Akbar Yarahmadi, Masoud Rajabi, Mohammad Talafi Noghani
    , 2016
18. ""
    Alireza Khaksaran, Reza Tagiabadi, Mohammad Talafi Noghani, Mostafa Jafarzadgan
    , 2015
19. "Investigation of hydriding and dehydriding properties of La Ni5 hydrogen storage alloys"
    Mohammad Talafi Noghani, hosein Targholizadeh, Maryam Abdi kelishomi, reza bazl doost
    3th International Engineering Materials Metallurgy Conference, 2014
20. "Effect of grain refining and modification on mechanicla properties of Al - Si - Mg alloys with different Fe content"
    Mohammad Talafi Noghani, Reza Tagiabadi
    3th international Engineering Materials Metallurgy Conference, 2014
21. ""
    Mohammad Talafi Noghani
    4 th National Conference on Environment day roll of green economy in Ecosystem Management, pp.1477-1477, 2010
22. "The effect of La-intermetallic compounds on tensile properties of Al-15 Mg2Si in-situ composite"
    Ali asqar, Mohammad Talafi Noghani,
    , No 11 , pp.55-60, 2008
23. ""
    Mohammad Talafi Noghani, Reza Tagiabadi
    , No 3 , pp.1-10, 2008
24. "study of transformationdue to cold rolling on the metastable austenitic stainless steel"
    Mohammad Talafi Noghani,
    , pp.2-10, 2007
25. ""
    Mohammad Talafi Noghani
    , 2002
26. ""
    Mohammad Talafi Noghani
    , 2000