(Faculty Member)

Journal Paper

1. "Hybrid PLA-based bio-composites produced by DLP 3D printer with alumina and silica nanoparticles"
   Hossein Maleki, Parviz Asadi, , Sirus Safaee, I.M.R Najjar, Adel Fathy
   Materials Today Communications, Vol. 42, pp.1-14, 2025
2. "New trends in 3D and 4D printed dental and orthopedic Implants: Methods, applications and future directions"
   , Parviz Asadi, Mostafa Akbari, Mohammad Reza Mohammad Aliha, Ahmet Akif Kizilkurtlu, Ali Akpek, Sirus Safaee
   Bioprinting, Vol. 48, pp.406-442, 2025
3. "A Comprehensive Review on the Integration of Artificial Intelligence in Friction Stir Welding for Monitoring, Modelling, and Process Optimization"
   Mostafa Akbari, Ezatollah Hassanzadeh, Yaghuob Dadgar Asl,
   Journal of Advanced Joining Processes, Vol. 11, pp.100316-100336, 2025
4. "Enhancing corrosion resistance of AISI 4130 steel through optimized HVOF tungsten carbide coatings"
   , Mohammad Abedini Mohammadi, Javad Ansari, Parviz Asadi, Mostafa Akbari, Morteza Saghafiyazdi, Sirus Safaee
   Results in Surfaces and Interfaces, Vol. 18, pp.1-9, 2025
5. "Ion substitution in bioactive glass: A comprehensive review of structural modifications and functional effects"
   , Loghman Dehghan mehrjardi, Sirus Safaee
   Next Materials, Vol. 8, pp.100598-100608, 2025
6. "Investigation of tribological behavior for IN625 coating on IN738 superalloy by laser cladding process"
   Amirhossein Aboutorabi sani, Morteza Saghafiyazdi, Mohammad Talafi Noghani, Morteza Taheri,
   Emergent Materials, Vol. 8, pp.887-904, 2025
7. "Multi-layered coatings for improving implant performance of titanium"
   Sirus Safaee, Shigeaki Abe, Mahdis Nesabi, , Parviz Asadi, Kazuhiro Yoshida, Hitomo Okazaki, Kae Harada, Ikuya Watanabe, Hiroshi Murata
   CERAMICS INTERNATIONAL, Vol. 51, pp.32108-32125, 2025
8. "Synthesis and characterization of Li and Zn doped bioactive glass_ ceramics for application in bone tissue engineering"
   Arman Sedghi, Fateme Sobhan, , Fatemeh Shahriari, Soolmaz Heidari
   JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, Vol. 114, pp.826-840, 2025
9. "Influence of pin thread on particle distribution in the FSP using the CEL method"
   Mostafa Akbari, Parviz Asadi, , Ezatollah Hassanzadeh
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 239, 2025
10. "Impact of Flat-Surfaced Pins on Material Flow and Particle Distribution in Friction Stir Processing: A CEL Method Analysis"
    Mostafa Akbari, Parviz Asadi, Amin Abdollahzadeh, Milad Esfandiar,
    PHYSICA SCRIPTA, Vol. 100, pp.1-16, 2025
11. "Review on the strategies to improve the mechanical strength of highly porous bone bioceramic scaffolds"
    zahra miri, Hvard Jostein Haugen, Dagnija Loca, Filippo Rossi, Giuseppe Perale, , Qianli Ma
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, Vol. 44, pp.23-42, 2024
12. "(Alumina and graphene)/ PLA nanocomposites manufactured by digital light processing 3D printer"
    Hossein Maleki, Parviz Asadi, Arman Sedghi, Naghdali Choupani, , Mamdouh I. Elamy
    Journal of Materials Research and Technology-JMR and T, Vol. 32, pp.3120-3134, 2024
13. "Emerging Horizons in Laser-Based Additive Manufacturing of Titanium Alloys and Composites for Biomedical Applications: A Comprehensive Review"
    Mohammadreza Tahriri, Masoud Ghorbani Moghaddam, S. Habib Alavi, , Mir Hadi Razeghi, Obiora Azie, David Berzins, Lobat Tayebi
    3D Printing and Additive Manufacturing, 2024
14. "Synthesis of binder-free hybrid Ni-Co-Se@NiS2 nanostructures as highly active and durable electrocatalyst for hydrogen evolution reaction in alkaline media and Seawater"
    Sina Jamali, Mohammad Abedini mohammadi, Morteza Saghafiyazdi, Mohammad Talafi Noghani, , Mohammad Rezayat, Miguel Morales
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY, Vol. 969, pp.118527-118540, 2024
15. "Effect of Lateral Laser-Cladding Process on the Corrosion Performance of Inconel 625"
    Mohamad Rezayat, Amirhossein Aboutorabi sani, Mohammad Talafi Noghani, Morteza Saghafiyazdi, Morteza Taheri, , Mohammad Abedini mohammadi, Mahmoud Moradi, Antonio Manuel Mateo Garcia, Hossein Besharatloo
    Metals, Vol. 13, pp.1-16, 2023
16. "Significance of mechanical loading in bone fracture healing, bone regeneration, and vascularization"
    Qianli Ma, Zahra Miri, Havard Jostein Haugen, , Dagnjia Loca
    Journal of Tissue Engineering, Vol. 14, pp.1-34, 2023
17. "Synthesis and characterization of Mg and Sr-modified calcium phosphate/gelatin biomimetic scaffolds for bone tissue engineering"
    , Majid Raz, Zahra Miri, Saba Nasiripour, Loghman Dehghan mehrjardi, Mohammad Mohaghegh Dehabadi, Morteza Elsa
    CERAMICS INTERNATIONAL, Vol. 49, pp.18255-18263, 2023
18. "Nanostructured bioactive glasses: A bird's eye view on cancer therapy"
    Saeid Kargozar, , Ali Rashvand, Amir K. Miri, Sepideh Hamzehlou, Francesco Baino, Masoud Mozafari, Andrew Z. Wang
    Wiley Interdisciplinary Reviews-Nanomedicine and Nanobiotechnology, Vol. 15, pp.1-25, 2023
19. "Synthesis and optimization of Mo-Ni-Se@NiSe core-shell nanostructures as efficient and durable electrocatalyst for hydrogen evolution reaction in alkaline media"
    Mohammad Abedini mohammadi, Morteza Saghafiyazdi, Mohammad Talafi Noghani, , Seiedali Hosseini
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 47, pp.34455-34470, 2022
20. "Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method"
    Seiedali Hosseini, Zeynodin Karami, , Morteza Saghafiyazdi, Mohammad Abedini mohammadi,
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 55, pp.161-171, 2022
21. "Hydrothermally grown mixed ternary nickel ferrite oxides as hybrid battery-type electrodes"
    Seiedali Hosseini, Morteza Saghafiyazdi, Zeynodin Karami, , Mohammad Abedini mohammadi,
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, Vol. 33, pp.11725-11742, 2022
22. "Review of current literature for vascularized biomaterials in dental repair"
    , Berivan Cecen, Nazanin Nafisi, Zahra Miri, Derek H. Rosenzweig, Amir K. Miri
    BIOCHEMICAL ENGINEERING JOURNAL, Vol. 186, pp.1-11, 2022
23. "Nonlinear Viscoelastic Modeling of Synthesized Silicate-Based Bioactive Glass/Polysulfone Composite: Theory and Medical Applications"
    , Arang Pazhouheshgar, Alireza Ghorbanoghli
    Silicon, Vol. 14, pp.731-740, 2022
24. "An investigation on structural and in vitro biological properties of silicate-based bioactive glass powder in SiO2-CaO - P2O5-ZrO2 - Li2O quintuplet system"
    Mahzad Haji Mahdi Tajer, , Mohammadamin Zohourfazeli, Zahra Miri, Seyed Hesamedin Hosseini, Loghman Dehghan Mehrjardi, Roozbeh Aghabarari, Hossein Zamani
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 285, pp.1-9, 2022
25. "Comprehensive in vitro studies of novel sol gel-derived Zr4+/Zn2+ co-substituted bioactive glass with enhanced biological properties for bone healing"
    , Mohammadamin Zohourfazeli, Mahzad Haji Mahdi Tajer, Amir K. Miri
    JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 566, 2021
26. "Biosensors and nanotechnology for cancer diagnosis (lung and bronchus, breast, prostate, and colon): a systematic review"
    Fariborz Sharifianjazi, Azadeh Jafari Rad, Ameneh Bakhtiari, Firoozeh Niazvand, Amirhossein Esmaeilkhanian, Leila Bazli, Milad Abniki, Mohammad Irani,
    Biomedical Materials, Vol. 17, 2021
27. "The effect of Ag substitution on physico-chemical and biological properties of sol-gel derived 60%SiO2-31%CaO-4%P2O5-5%TiO2 (mol%) quaternary bioactive glass"
    , Saba Nasiripour, Seyed Mohammad Hosseini, Seyed hesam odin Hoseyni, Ali Rashvand, Alireza Ghorbanoghli, Arang Pazhouheshgar, Fariborz Sharifian Jazi
    JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 560, pp.120732-120741, 2021
28. "Characterization, in vitro bioactivity and biological studies of sol-gel-derived TiO2 substituted 58S bioactive glass"
    , Saba Nasiripour, Atiyyeh Koohfar, Mohammad Sajjadnejad, SeyedMohammad Hoseyni, Mohsen Taherkhani, Zahra Miri, Seyed hesam odin Hoseyni, Mehrnaz Aminitabar, Ali Rashvand
    International Journal of Applied Ceramic Technology, Vol. 18, pp.1430-1441, 2021
29. "Mixed ternary metal MFeCo (M = Al, Mg, Cu, Zn, or Ni) oxide electrodes for high-performance energy storage devices"
    Morteza Saghafiyazdi, Seiedali Hosseini, Zeynodin Karami, , Mohammad Abedini mohammadi,
    IONICS, Vol. 27, pp.3777-3791, 2021
30. "Comprehensive investigation on multifunctional properties of zirconium and silver co-substituted 58S bioactive glass"
    Mohammadamin Zohourfazeli, Mahzad Haji Mahdi Tajer,
    CERAMICS INTERNATIONAL, Vol. 47, pp.2499-2507, 2021
31. "Synthesis and characterization of in vitro properties and biological behavior of Ag/Li co-doped 68S bioactive glass with and without phosphate"
    Mohsen Rahmani, , Morteza Saghafiyazdi
    JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 570, pp.1-9, 2021
32. "Sol-gel derived silicate-based bioactive glass: Studies of synergetic effect of zirconium and magnesium on structural and biological characteristics"
    , Mahzad Haji Mahdi Tajer, Mohammadamin Zohourfazeli, Zahra Miri, Morteza Saghafiyazdi
    JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 554, pp.1-10, 2021
33. "Synthesis and characterization of electrospun cerium-doped bioactive glass/chitosan/polyethylene oxide composite scaffolds for tissue engineering applications"
    Alireza Saatchi, Ahmad Razaghian Arani, , Masoud Mozafari
    CERAMICS INTERNATIONAL, Vol. 47, pp.260-271, 2021
34. "Wear behavior of alkaline pulsed electrodeposited nickel composite coatings reinforced by ZnO nanoparticles"
    Mohammad Sajjadnejad, Seyyed Mohammad Saleh Haghshenas, Vahid Tavakoli Targhi, Nader Setoudeh, Ali Hadipour, , Saman Hosseinpour
    WEAR, Vol. 468, pp.1-53, 2021
35. "Cerium-doped bioactive glass-loaded chitosan/polyethylene oxide nanofiber with elevated antibacterial properties as a potential wound dressing"
    Alireza Saatchi, Ahmad Razaghian Arani, , Masoud Mozafari
    CERAMICS INTERNATIONAL, Vol. 47, pp.9447-9461, 2021
36. "The Effect of Ag Substitution on Physicochemical and Biological Properties of Sol-Gel Derived 60%SiO2-31%CaO-4%P2O5-5%Li2O (mol%) Quaternary Bioactive Glass"
    Mohsen Rahmani, , Morteza Saghafiyazdi
    CERAMICS INTERNATIONAL, Vol. 47, pp.15985-15994, 2021
37. "Synthesis, characterization and in vitro biological properties of simultaneous co-substituted Ti+4/Li+1 58s bioactive glass"
    , Atiyyeh Koohfar, SeyedMohammad Hosseini, Seyed hesam odin Hoseyni, Alireza Ghorbanoghli, Mohammad Sajjadnejad, Majid Raz, Morteza Elsa, Fariborz Sharifianjazi
    JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 561, pp.120740-120752, 2021
38. "Structural and in vitro biological evaluation of sol-gel derived multifunctional Ti+4/Sr+2 co-doped bioactive glass with enhanced properties for bone healing"
    , Saba Nasiripour, Zahra Miri, Zeinab Hajifathali, Seyed hesam odin Hoseyni, Mohammad Sajjadnejad, Roozbeh Aghabarary, Nooshin Nankali, Amir K. Miri, Mohammadreza Tahriri
    CERAMICS INTERNATIONAL, Vol. 47, pp.29451-29462, 2021
39. "Finite element method and analytical analysis of static and dynamic pull-in instability of a functionally graded microplate"
    Arang Pazhouheshgar, Yashar Haghighatfar,
    JOURNAL OF VIBRATION AND CONTROL, pp.1-14, 2020
40. "Novel antibacterial Cu/Mg-substituted 58S-bioglass: Synthesis, characterization and investigation of in vitro bioactivity"
    , Alireza Ghorbanoghli, Masoud Kazem- Rostami, Arang Pazhouheshgar, Emad Salari, Morteza Saghafiyazdi, , Hossein Jahani, Fariborz Sharifian Jazi, Mohammadreza Tahriri
    International Journal of Applied Glass Science, Vol. 11, pp.685-698, 2020
41. "The effect of zirconium content on in vitro bioactivity, biological behavior and antibacterial activity of sol-gel derived 58S bioactive glass"
    , Mohammadamin Zohourfazeli, Mahzad Haji Mahdi Tajer
    JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 546, pp.1-9, 2020
42. "Preparation, characterization and in vitro biological response of simultaneous co-substitution of Zr+4/Sr+2 58S bioactive glass powder"
    , Mohammadamin Zohourfazeli, Mahzad Haji Mahdi Tajer, Zahra Miri, SeyedMohammad Hosseini, Ali Rashvand
    CERAMICS INTERNATIONAL, 2020
43. "Ternary nanostructured MZnCo oxides (M=Al, Mg, Cu, Fe, Ni) prepared by hydrothermal method as excellent charge storage devices"
    Morteza Saghafiyazdi, Seiedali Hosseini, Shahab aldin Zangeneh, , Shams aldin Mohajerzadeh
    IONICS, Vol. 26, pp.1491-1505, 2020
44. "A review of additive manufacturing of Mg-based alloys and composite implants"
    Yasamin Zamani, Hadi Ghazanfari, Gisou Erabi, , Belma Faki, Seyed Mohammad Hosseini, Pasha Mahammod Babar
    journal of composites and compounds, Vol. 2, pp.71-83, 2020
45. "Fabrication of copper/stainless steel bimetallic couple, by diffusion bonding using silver and nickel foils as interlayers"
    Mansoor Ekrami, Javad Shahbazi Karami, Alireza Araee, Fariborz Sharifianjazi, Ehsan Sadeghi,
    Inorganic and Nano-Metal Chemistry, Vol. 49, pp.152-162, 2019
46. "Graphene and its derivatives: Opportunities and challenges in dentistry"
    M. Tahriri, M. Del Monico, , M. Tavakkoli Yaraki, R. Torres, A. Yadegari, L. Tayebi
    Materials Science and Engineering C-Materials for Biological Applications, Vol. 102, pp.171-185, 2019
47. "Friction stir welding of pure magnesium and polypropylene in a lap-joint configuration: Microstructure and mechanical properties"
    , Moslem Paidar, Seyyed Salman Seyedafghahi, Olatunji Oladimeji Ojo
    International Journal of Minerals Metallurgy and Materials, Vol. 26, pp.766-774, 2019
48. "Pre-threaded hole friction stir spot welding of AA2219/PP-C30S sheets"
    Moslem Paidar, Olatunji Oladimeji Ojo, , Hossein Karami Pabandi, Morteza Elsa
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 273, pp.272-285, 2019
49. "Effect of Si on the structure and mechanical properties of Al-10%Mg-0.1%Ti alloy"
    M Rasouli, , S Sadreddini, O O Ojo
    Materials Research Express, Vol. 6, pp.1-20, 2019
50. "The experimental and numerical study of fracture behavior of 58s bioactive glass/polysulfone composite using the extended finite elements method"
    Arang Pazhouheshgar, Seyyed Ali Sadough Vanini,
    Materials Research Express, Vol. 6, pp.1-10, 2019
51. "Charge storage properties of mixed ternary transition metal ferrites MZnFe oxides (M =Al, Mg, Cu, Fe, Ni) prepared by hydrothermal method"
    Morteza Saghafiyazdi, Seiedali Hosseini, Shahab aldin Zangeneh, , Vahid Salarvand, Samaneh Vahedi, Shamsaldin Mohajerzadeh
    SN Applied Sciences, Vol. 1, pp.1-16, 2019
52. "Modified friction stir clinching with protuberance-keyhole levelling: A process for production of welds with high strength"
    Moslem Paidar, Olatunji Oladimeji Ojo, , Amal Shaji Karapuzha, Akbar Heidarzadeh
    Journal of Manufacturing Processes, Vol. 41, pp.177-187, 2019
53. "The effect of magnesium content on in vitro bioactivity, biological behavior and antibacterial activity of sol-gel derived 58S bioactive glass"
    , Arman Sedghi, Alireza Ghorbanoghli, Emad Salari
    CERAMICS INTERNATIONAL, Vol. 44, pp.9422-9432, 2018
54. "A comparative study on the in vitro formation of hydroxyapatite, cytotoxicity and antibacterial activity of 58S bioactive glass substituted by Li and Sr"
    , sadegh firoozi, mohammadreza tahriri, Arman Sedghi
    Materials Science and Engineering C-Materials for Biological Applications, Vol. 91, pp.349-360, 2018
55. "Synthesis and in vitro studies of sol-gel derived lithium substituted 58S bioactive glass"
    , Sadegh Firoozi, Mohammadreza Tahriri
    CERAMICS INTERNATIONAL, Vol. 43, pp.12835-12843, 2017
56. "Characterization, in vitro bioactivity and biological studies of sol-gel synthesized SrO substituted 58S bioactive glass"
    , Sadegh Firoozi, Mohammadreza Tahriri
    CERAMICS INTERNATIONAL, Vol. 43, pp.14880-14890, 2017
57. "Study of the Chemical Composition of Two-Component Bioactive Glass 50SiO2- 50CaO on an Atomic Scale Using Molecular Dynamics Simulation for Bone Tissue Engineering Applications"
    , Arman Tayebi
    Vol. 44, pp.109-122, 2025
58. "Structural Analysis, Determination of the Distribution of Bridging and Non-Bridging Oxygens and their Bond with Si and P in Binary Bioactive Glass with a Chemical Composition Based on 50X-50CaO: X=SiO2, P2O5 (mol.%) Using Computer Modeling"
    , Nilufar Kulivand, Arman Tayebi
    Vol. 14, pp.89-102, 2025
59. ""
    
    Vol. 20, pp.1-14, 2025
60. ""
    , Arman Tayebi, Nilufar Kulivand
    pp.1-11, 2025
61. "Study of the Biological Properties of 68S Bioactive Glass Stabilized at Temperatures of 600-800 C to Improve its Biocompatibility in Bone Tissue Engineering Therapeutic Applications"
    Raheil Ashrafzadeh shimi, , Morteza Saghafiyazdi, Nilufar Kulivand
    Vol. 43, pp.67-80, 2024
62. "In vitro investigation of the GdF3:Bi nanoparticles synthesized via hydrothermal method as the dual MRI-CT contrast agent"
    Mohammad Abbasi, Reza Ahmadi, , Aazam Jannati Esfehani
    Vol. 17, pp.17-28, 2024
63. "Investigation of Self-Diffusion Coefficient, Bond Angle, and the Ratio of Bridging Oxygen to Non-Bridging Oxygens of 50P2O5-50CaO Calcium Phosphate Bioactive Glass: A Molecular Dynamics Simulation Study"
    
    Vol. 15, pp.1-13, 2024
64. ""
    Mohammad Abbasi, Reza Ahmadi, , Aazam Jannati Esfehani
    2023
65. "Investigation of Electrochemical Properties of Cobalt Phospho Selenide Nanostructured Electrode in Hydrogen Evolution Reaction"
    Nafisehsadat Miran, Morteza Saghafiyazdi, Mohammad Talafi Noghani,
    Vol. 11, pp.46-59, 2023
66. ""
    Javad Ansari, , Morteza Saghafiyazdi
    Vol. 16, pp.13-26, 2022
67. ""
    , Majid Raz, Fatollah Moztarzadeh
    Vol. 15, 2021
68. "Investigation of the Effect of Strontium Ion Content on Thermal, Bioactivity, Antibacterial Properties and Behavior of MC3T3-E1 Osteoblast Cells in Silicate-Based Bioactive Glass"
    Nooshin Nankali, , Morteza Saghafiyazdi
    Vol. 15, pp.81-95, 2021
69. ""
    Faeze Zolghadr, Arman Sedghi, Saeid Baghshahi,
    Vol. 17, pp.40-48, 2021
70. "The Extended Finite Element Method Numerical and Experimental Analysis of Mechanical Behavior of Polysulfone/58s Bioactive Glass Synthesized through Solvent Casting Method"
    Arang Pazhouheshgar, , Seyed Ali Sadough Vanini
    Vol. 20, pp.2061-2073, 2020
71. "Investigation the In Vitro and Bactericidal Properties of Magnesium and Copper Containing Bioactive Glasses"
    , Mohammadamin Zohourfazeli
    Vol. 9, pp.20-34, 2020
72. ""
    , Mohammadamin Zohourfazeli
    Vol. 13, pp.17-30, 2020

Conference Paper

1. "Design and Synthesize the Advanced Functional Substituted Bioactive Glasses for Personalized Tissue Engineering Therapies"
   
   International Meet on Stem Cells and Regenerative Medicine (STEMCELLSMEET2024), pp.1-27, 2024
2. "Synthesis and Physicochemical Characterization of Biomimetic Scaffold of Gelatin/Zn-Incorporated 58S Bioactive Glass"
   Seyedmohammad Hosseini,
   ICABB 2023: 17. International Conference on Applied Biology and Biotechnology, 2023
3. "Investigation the properties of synthesized copper based Nano-composites with TiO2 particles"
   Mohammadamin Zohourfazeli, Mahzad Haji Mahdi Tajer
   The 6th International Conference on Composites: Characterization, Fabrication and Application, 2018
4. "Characterization and in vitro studies on the effect of SrO on nano-hydroxyapatite layer in bio-composites"
   Mohammadamin Zohourfazeli, Mahzad Haji Mahdi Tajer
   The 6th International Conference on Composites: Characterization, Fabrication and Application, 2018
5. ""
   Raheil Ashrafzadeh shimi, Morteza Saghafiyazdi
   The 12th international conference on materials science & metallurgical engineering, pp.1-4, 2023
6. ""
   Samira Hashemi, Morteza Saghafiyazdi, Reza Ahmadi
   The 12th international conference on materials science & metallurgical engineering, pp.1-4, 2023
7. ""
   Nooshin Nankali, Morteza Saghafiyazdi
   11th International Conference on Materials & Metallurgical Engineering (iMat2022), 2022
8. ""
   Vahid Keshavarz, Morteza Saghafiyazdi
   11th International Conference on Materials & Metallurgical Engineering (iMat2022), pp.1-9, 2022
9. ""
   Ebrahim Gholamian, Ahmad Razaghian Arani, Mostafa Jafarzadgan,
   11th International Conference on Materials & Metallurgical Engineering (iMat2022), pp.1-16, 2022
10. ""
    Nilufar Kulivand, Reza Ahmadi, Morteza Saghafiyazdi
    11th International Conference on Materials & Metallurgical Engineering (iMat2022), pp.1-15, 2022
11. "Characterization of the sol-gel drived magnesium oxide doped 77S bioactive glass"
    Nilufar Kulivand, Reza Ahmadi, Morteza Saghafiyazdi
    , 2022
12. ""
    Vahid Keshavarz, Morteza Saghafiyazdi
    Third National Conference on Micro/Nanotechnology-ISC- 01220-93971, 2022
13. ""
    Nooshin Nankali, Morteza Saghafiyazdi
    , 2021
14. ""
    Mohsen Rahmani, Morteza Saghafiyazdi
    , 2020
15. ""
    Saba Nasiri pour
    8th Iran International Conferenece & Exhibition on Materials Science & Metallurgical Engineering, 2019
16. ""
    Atiyyeh Koohfar
    8th Iran International Conferenece & Exhibition on Materials Science & Metallurgical Engineering, No 8 , pp.1-33, 2019