Parviz Asadi (Faculty Member)

Journal Paper

1. "Friction stir extrusion: Parametrical optimization for improved Al-Si aluminum tube production"
   Mostafa Akbari, Parviz Asadi, Fevzi Bedir, Naghdali Choupani
   International Journal of Lightweight Materials and Manufacture, Vol. 8, pp.182-193, 2025
2. "Improving Bioactivity and Corrosion Resistance of Laser-Powder-Bed-Fused Ti6Al4V with Hydroxyapatite and Titanium Oxide Nanocomposite Coatings Applied by Electrophoretic Deposition"
   H. Sohrabpoor, Vahid Salarvand, Morteza Torabpour, Morteza Saghafiyazdi, Parviz Asadi, D. Brabazon, B. D. Stein, R. Raghavendra
   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 34, pp.20459-20473, 2025
3. "Hybrid PLA-based bio-composites produced by DLP 3D printer with alumina and silica nanoparticles"
   Hossein Maleki, Parviz Asadi, , Sirus Safaee, I.M.R Najjar, Adel Fathy
   Materials Today Communications, Vol. 42, pp.1-14, 2025
4. "Impact of Flat-Surfaced Pins on Material Flow and Particle Distribution in Friction Stir Processing: A CEL Method Analysis"
   Mostafa Akbari, Parviz Asadi, Amin Abdollahzadeh, Milad Esfandiar,
   PHYSICA SCRIPTA, Vol. 100, pp.1-16, 2025
5. "Incorporation of machine learning in the design of bio-nanocomposites produced by DLP 3D printer"
   Hossein Maleki, Parviz Asadi, Mostafa Akbari, Maryam Peyghami, Vahid Salarvand, Fevzi Bedir
   Results in Engineering, Vol. 27, 2025
6. "Multi-layered coatings for improving implant performance of titanium"
   Sirus Safaee, Shigeaki Abe, Mahdis Nesabi, , Parviz Asadi, Kazuhiro Yoshida, Hitomo Okazaki, Kae Harada, Ikuya Watanabe, Hiroshi Murata
   CERAMICS INTERNATIONAL, Vol. 51, pp.32108-32125, 2025
7. "Recent advances in friction stir welding/processing tools"
   Mostafa Akbari, Tarasankar DebRoy, Parviz Asadi, Tomasz Sadowski
   Journal of Manufacturing Processes, Vol. 142, pp.99-156, 2025
8. "New trends in 3D and 4D printed dental and orthopedic Implants: Methods, applications and future directions"
   , Parviz Asadi, Mostafa Akbari, Mohammad Reza Mohammad Aliha, Ahmet Akif Kizilkurtlu, Ali Akpek, Sirus Safaee
   Bioprinting, Vol. 48, pp.406-442, 2025
9. "Enhancing corrosion resistance of AISI 4130 steel through optimized HVOF tungsten carbide coatings"
   , Mohammad Abedini Mohammadi, Javad Ansari, Parviz Asadi, Mostafa Akbari, Morteza Saghafiyazdi, Sirus Safaee
   Results in Surfaces and Interfaces, Vol. 18, pp.1-9, 2025
10. "Influence of pin thread on particle distribution in the FSP using the CEL method"
    Mostafa Akbari, Parviz Asadi, , Ezatollah Hassanzadeh
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 239, 2025
11. "Effects of triflute pin geometry on defect formation and material flow in FSW using CEL approach"
    Mostafa Akbari, Parviz Asadi
    Journal of Advanced Joining Processes, Vol. 10, pp.1-11, 2024
12. "Process Parameters and Tool Design in Friction Stir Extrusion: A Sustainable Recycling Technique"
    Mostafa Akbari, Parviz Asadi, Reza Abdi Behnagh, Fevzi Bedir, Naghdali Choupani, Tomasz Sadowski
    Engineering Reports, Vol. 10, pp.1-39, 2024
13. "(Alumina and graphene)/ PLA nanocomposites manufactured by digital light processing 3D printer"
    Hossein Maleki, Parviz Asadi, Arman Sedghi, Naghdali Choupani, , Mamdouh I. Elamy
    Journal of Materials Research and Technology-JMR and T, Vol. 32, pp.3120-3134, 2024
14. "Examining the impact of tool taper angle in Al-Si tube manufacturing by friction stir extrusion"
    Parviz Asadi, Mostafa Akbari, Tomasz Sadowski, Yaghuob Dadgar Asl, Naghdali Choupani, Fevzi Bedir
    Journal of Manufacturing Processes, Vol. 131, pp.532-544, 2024
15. "Fracture toughness determination for epoxy-based polymer concrete mixtures: Applicability of different rectangular beam and circular disc specimens"
    M.R.M. Aliha, H.G. Kouchaki, M.H. Mohammadi, P.J. Haghighatpour, N. Choupani, Parviz Asadi, M. Akbari, M.G. Darvish, T. Sadowski
    Composites Part C: Open Access, Vol. 14, pp.1-13, 2024
16. "Modeling and optimization of process parameters of the piston alloy-based composite produced by FSP using response surface methodology"
    Mostafa Akbari, Parviz Asadi, MohammadReza Mohammad Aliha, Filippo Berto
    SURFACE REVIEW AND LETTERS, Vol. 30, pp.1-15, 2023
17. "Selection of Optimal Tool Geometry for the Production of Brass Wires Using the FSBE Method"
    M Akbari, Parviz Asadi, H Rahimi Asiabaraki
    Journal of Solid Mechanics, Vol. 15, pp.66-77, 2023
18. "Production of LM28 Tubes by Mechanical Alloying and Using Friction Stir Extrusion"
    Parviz Asadi, Mostafa Akbari, Mahyar Talebi, , Tomasz Sadowski, Mohammad Reza Mohammad Aliha
    Crystals, Vol. 13, 2023
19. "Recycling of brass chips by sustainable friction stir extrusion"
    Parviz Asadi, Mostafa Akbari, Amir Armani, M.R.M. Aliha, , Tomasz Sadowski
    JOURNAL OF CLEANER PRODUCTION, Vol. 418, pp.1-12, 2023
20. "A Review on Friction Stir Welding/Processing: Numerical Modeling"
    Mostafa Akbari, Parviz Asadi, Tomasz Sadowski
    Materials, Vol. 16, pp.1-73, 2023
21. "Friction stir extrusion and mechanical alloying of LM13 casting ingot to produce LM28 tubes"
    Mahyar Talebi, Parviz Asadi, Mostafa Akbari
    Journal of Materials Research and Technology-JMR and T, Vol. 27, pp.6672-6687, 2023
22. "Modeling of pin shape effects in bobbin tool FSW"
    Parviz Asadi, Mohammad hosein Mirzaei, Mostafa Akbari
    International Journal of Lightweight Materials and Manufacture, Vol. 5, pp.162-177, 2022
23. "INVESTIGATION OF WEAR AND MICROSTRUCTURAL PROPERTIES OF A356/ TiC COMPOSITES FABRICATED BY FSP"
    MOSTAFA AKBARI, Parviz Asadi, HOSSEIN RAHIMI ASIABARAKI
    SURFACE REVIEW AND LETTERS, Vol. 29, pp.1-10, 2022
24. "Investigation of the effect of tool probe profile on reinforced particles distribution using experimental and CEL approaches"
    Mostafa Akbari, Morteza Ezzati, Parviz Asadi
    International Journal of Lightweight Materials and Manufacture, Vol. 5, pp.213-223, 2022
25. "Effects of different cooling conditions on friction stir processing of A356 alloy: Numerical modeling and experiment"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 236, pp.4133-4146, 2022
26. "Characterization of the Influence of Rotational and Traverse Speeds on the Mechanical and Microstructural Properties of Wires Produced By the FSBE Method"
    Parviz Asadi, Mostafa Akbari, Omid Kohantorabi, , M. R. M. Aliha, S. M. Salehi, H. R. Asiabaraki, Filippo Berto
    STRENGTH OF MATERIALS, Vol. 54, pp.318-330, 2022
27. "Multivariate optimization of mechanical and microstructural properties of welded joints by FSW method"
    Parviz Asadi, M.R.M. Aliha, Mostafa Akbari, D.M. Imani, Filippo Berto
    ENGINEERING FAILURE ANALYSIS, Vol. 140, pp.1-11, 2022
28. "A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion"
    Mostafa Akbari, Parviz Asadi, Hossein Rahimi Asiabaraki
    Iranian Journal of Materials Forming, Vol. 8, pp.46-62, 2021
29. "Formability study and metallurgical properties analysis of FSWed AA 6061 blank by the SPIF process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    SN Applied Sciences, Vol. 3, pp.1-23, 2021
30. "Simulation and experimental investigation of multi-walled carbon nanotubes/aluminum composite fabrication using friction stir processing"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 235, pp.2165-2179, 2021
31. "Effect of Tool Pin Shape on Defect-Free FSP and Particles Distribution in SiC/Al6061 Composites"
    Morteza Ezzati, Parviz Asadi, Mostafa Akbari
    Journal of Advanced Materials and Processing, Vol. 9, pp.49-62, 2021
32. "Numerical modeling and experimental investigation of brass wire forming by friction stir back extrusion"
    Parviz Asadi, Mostafa Akbari
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 119, pp.1-15, 2021
33. "Material flow modeling for the DSFSW of magnesium alloy"
    Parviz Asadi, Mohammad hosein Mirzaei
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. 56, pp.275-290, 2021
34. "Improving the Hardness and Microstructural Properties of Piston Alloy Using the FSP Method"
    Mostafa Akbari, Parviz Asadi, Hossein Rahimi Asiabaraki
    Journal of Modern Processes in Manufacturing and Production, Vol. 10, pp.53-62, 2021
35. "Numerical investigation on the effect of welding speed and heat input on the residual stress of multi-pass TIG welded stainless steel pipe"
    Parviz Asadi, Samaneh Alimohammaditatar, Omid Kohantorabi, Ali Soleymani, Ali Fazli
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 235, pp.1007-1021, 2021
36. "Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using Taguchi method"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 12, pp.2709-2719, 2021
37. "Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method"
    Mostafa Akbari, Parviz Asadi, Reza Abdi Behnagh
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 113, pp.721-734, 2021
38. "Effects of material type, preheating and weld pass number on residual stress of welded steel pipes by multi-pass TIG welding (C-Mn, SUS304, SUS316)"
    Parviz Asadi, Samaneh Alimohammaditatar, Omid Kohantorabi, Ali Fazli, Mostafa Akbari
    Thermal Science and Engineering Progress, Vol. 16, pp.1-12, 2020
39. "Dissimilar friction stir lap welding of aluminum to brass: Modeling of material mixing using coupled Eulerian-Lagrangian method with experimental verifications"
    Mostafa Akbari, Parviz Asadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 234, pp.1117-1128, 2020
40. "Effect of Tool Pin Profile on Material Flow in Double Shoulder Friction Stir Welding of AZ91 Magnesium Alloy"
    Mohammad hosein Mirzaei, Parviz Asadi, Ali Fazli
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 183, 2020
41. "Optimization of microstructural and mechanical properties of friction stir welded A356 pipes using Taguchi method"
    Mostafa Akbari, Parviz Asadi
    Materials Research Express, Vol. 6, 2019
42. "Formability analysis of dissimilar friction stir welded AA 6061 and AA 5083 blanks by SPIF process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    CIRP Journal of Manufacturing Science and Technology, Vol. 25, pp.50-68, 2019
43. "Formation of thermo-mechanically affected zone in friction stir welding"
    Parisa Zolghadr, Mostafa Akbari, Parviz Asadi
    Materials Research Express, Vol. 6, 2019
44. "Hybrid multi-objective optimization of microstructural and mechanical properties of B 4 C/A356 composites fabricated by FSP using TOPSIS and modified NSGA-II"
    Mostafa AKBARI, Mohammad Hasan SHOJAEEFARD, Parviz Asadi, Abolfazl KHALKHALI
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 27, pp.2317-2333, 2017
45. "Wear and mechanical properties of surface hybrid metal matrix composites on AlSi aluminum alloys fabricated by friction stir processing"
    Mostafa Akbari, Mohammad Hasan Shojaeefard, Parviz Asadi, Abolfazl Khalkhali
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 2, pp.1464420717-1464420726, 2017
46. "The effect of reinforcement type on the microstructure mechanical properties and wear resistance of A356 matrix composites produced by FSP"
    Mohammad Hasan Shojaeefard, Mostafa Akbari, Parviz Asadi, Abolfazl Khalkhali
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 91, pp.1391-1407, 2017
47. "Multicriteria optimization of mechanical properties of aluminum composites reinforced with different reinforcing particles type"
    Mostafa Akbari, Parviz Asadi, Parisa Zolghadr, Abolfazl Khalkhali
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 1, pp.954408917-954408931, 2017
48. "Wear Performance of A356 Matrix Composites Reinforced with Different Types of Reinforcing Particles"
    Mostafa Akbari, Mohammad Hasan Shojaeefard, Parviz Asadi, Abolfazl Khalkhali
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 3, pp.1-14, 2017
49. "Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate"
    Parviz Asadi, Ali Fazli, Hossein Jafar zadeh, Hossein Maleki
    Vol. 10, pp.39-48, 2024
50. "Morphology of tensile and wear surfaces of resin / alumina nanocomposite"
    Hossein Maleki, Parviz Asadi, مصطفي اكبري, حسين رحيمي آسيابركي
    Vol. 11, pp.35-45, 2024
51. "Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing"
    Hossein Maleki, Parviz Asadi, Zahra Karimi, Arman Sedghi
    Vol. 5, pp.57-67, 2023
52. ""
    حسين رحيمي, مصطفي اكبري, Parviz Asadi
    Vol. 9, pp.52-59, 2022
53. "Experimental Investigation of Welding Defects in Butt Joining of Aluminum Alloy by Friction Stir Welding: Effects of Tool Pin Profile and Process Parameters"
    مصطفي اكبري, Parviz Asadi
    Vol. 19, pp.125-143, 2022
54. "The effect of the die geometry on the joint strength of Al 3105 aluminum sheets joined by the clinching process"
    Mohammad hosein Mirzaei, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 7, pp.10-23, 2021
55. "Experimental investigation of the joinability of three-layer aluminum/ polymer/ aluminum composite sheets by the clinching process"
    Rasoul Naderli, Ali Fazli, Mahdi Soltanpour, Parviz Asadi
    Vol. 8, pp.27-38, 2021
56. ""
    hossein yousefi, Mehdi Dianati, Omid Kohantorabi, Parviz Asadi
    Vol. 29, pp.34-46, 2020
57. "Experimental and numerical investigation of the formability of friction stir welded 5083 aluminum alloy sheets in single point incremental forming process"
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 18, pp.45-55, 2018
58. ""
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    Vol. 26, pp.22-39, 2018

Conference Paper

1. "Recycling of Brass Chips by Sustainable Friction Stir Extrusion"
   Parviz Asadi, Mostafa Akbari, Amir Armani
   International Conference on Green Manufacturing and Product Design (ICGMPD - 23), pp.336-351, 2023
2. ""
   Ali Fazli, Parviz Asadi, Hamed Barotiha, Mojtaba Mashayekhi
   , pp.1-6, 2023
3. ""
   Hosein Rahimi Asiabaraki, Parviz Asadi, Mostafa Akbari, Morteza Ezzati
   , 2022
4. ""
   Mostafa Akbari, Parviz Asadi, Hosein Rahimi Asiabaraki
   , 2022
5. ""
   Mohammad hosein Mirzaei, Parviz Asadi, Ali Fazli, Mohammad Mehrabadi
   , 2019
6. ""
   Mehran Shafiee alavijeh, Parviz Asadi, Mohammad hosein Mirzaei, Mohammad Mohebi rad
   , 2019
7. ""
   Mohammad Mohebi rad, Parviz Asadi, Mohammad hosein Mirzaei, Mehran Shafiee alavijeh
   , 2019
8. ""
   Seyyed Masoud Mirbabashahi, Parviz Asadi, Mohammadreza Ebrahimian
   , pp.1-13, 2019
9. ""
   Keyvan Soleymanpour, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
   , pp.1-6, 2019
10. ""
    Samaneh Alimohammaditatar, Mahdi Soltanpour, Ali Fazli, Parviz Asadi
    , 2019
11. ""
    Mohsein Ashrafi, Parviz Asadi, Mohammadreza Ebrahimian
    , 2019
12. "Particle and hardness distribution in Al6061/SiC composite produced by FSP Investigation of edged pin profiles"
    Morteza Ezzati, Parviz Asadi
    1st National Conference on Micro/Nanoscale Technologies, 2018
13. "Considering the Effect of thresded pin profiles on particle distribution and tensile strength of Al6061/SiC composite produced by FSP"
    Morteza Ezzati, Parviz Asadi
    1st National Conference on Micro/Nanoscale Technologies, 2018
14. ""
    Payam Tayebi, Ali Fazli, Parviz Asadi, Mahdi Soltanpour
    , pp.1-9, 2017
15. ""
    Payam Tayebi, Ali Fazli, Parviz Asadi, Fateme Yousefi
    , pp.1-8, 2017